WATERTIGHT
Protects Surfaces
WATERTIGHT is formulated with Pliolite® resins developed by the Goodyear Tire & Rubber Company. WATERTIGHT protects surfaces by excellently resisting harmful alkali, salt, weathering, acid fumes, moisture and mildew.
WATERTIGHT
Resists Wind-Driven Rain
The Pliolite® resin used in WATERTIGHT furnishes a water-proofing ability proven over many years in a variety of climate conditions. WATERTIGHT meets the Wind-Driven Rain Test, which demonstrates the ability of the product to withstand wind-driven water at 98 m.p.h. for over eight hours.
WATERTIGHT
Resists Hydrostatic Ground Water Pressure
WATERTIGHT is ideal for use on below-grade masonry surfaces such as basements, tunnels, poured bridges, underpasses and foundations. Ground water pressure can quickly undermine the integrity of these structures. WATERTIGHT meets the Ground Water Hydrostatic Pressure Tests (4 psi) as required by Federal Specification Numbers TT-C-00555 and TT-P-001411 respectively.
WATERTIGHT
Beautifies
The brilliant white surface of WATERTIGHT enhances the overall appearance of the structure. WATERTIGHT maintains it's eye appeal by being resistant to weathering, moisture and mildew.
WATERTIGHT
Is Easy To Apply
WATERTIGHT is suitable for application by brush, roller or airless spray. It dries to touch in 30 minutes or less. Two coats are recommended. Apply self-priming WATERTIGHT to a surface free of dust, dirt, oil, grease or other foreign matter.
APPLICATION RATES:
50 square feet per gallon depending on the condition of the surface to be coated and the thickness desired.
Additional Application Instructions:
Before applying to new concrete - the concrete should be acid etched and rinsed thoroughly and allowed to dry completely.
Stir thoroughly. Can be thinned with TRC Asphalt Cleaning Solvent at a ratio of 2 ozs. per gallon (maximum 3 ozs.) and then applied by brush, roller, or airless spray. WATERTIGHT dries to the touch in 30 minutes or less. For best results, two coats are recommended. The second coat should be applied at least 36 hours after the initial coat. Application equipment can be easily cleaned with TRC Asphalt Cleaning Solvent.
|