|
|
 |
|
|
Who is Texas Refinery Corporation?
The various plants of Texas Refinery Corp. manufacture over 250 quality products that have been researched and developed to meet specific needs of customers all over the world TRC Protective Coatings are second to none for roof repair, new roof construction, parking lot maintenance and other building maintenance projects.
|
|
|
|
|
|
Curt Evans Authorized Sales Representative Toll Free 1 800 201-0590 E-mail <trc@peak.org> Call or E-Mail for Product Information, Pricing, Free Brochure and Price List or to Place an Order!
GSA Contract.....# GSO7F9216D
|
|
|
|
|
|
TRC-ALUMINUM ROOF COATING
|
|
|
|
|
|
USER BENEFITS:
- · REFLECTS 80% OF DAMAGING ULTRAVIOLET RAYS
- · INSULATES
- · INCREASES ROOF'S LIFE EXPECTANCY
- · BEAUTIFIES
- · EASY TO APPLY
|
|
|
|
|
|
TRC ALUMINUM ROOF COATING is a reflective top coating processed from high quality asphalt and fortified with pure aluminum flakes. It is designed to protect and preserve a roof by reducing the surface temperature. Its formulation is compatible with most asphalt built-up roof systems and meets ASTM D-2824, Type 1 standards.
|
|
|
Aluminum Roof Coatings and Patching Products
“Click on Product Name for Details”
|
|
|
|
|
|
|
|
|
TRC ALUMINUM ROOF COATING
Reflects 80% of Damaging UV Rays
The SUN is the most damaging enemy of any roof. Its rays dry out the preservative oils and asphalts in ordinary roofing materials. ALUMINUM ROOF COATING reflects up to 80% of the sun's ultraviolet rays. By deflecting these harmful rays, gleaming aluminum layers help protect roof asphalt from drying out and cracking.
ALUMINUM ROOF COATING
Insulates
In addition to protection, ALUMINUM ROOF COATING also helps to insulate. Unlike most insulating materials which retard heat after they have penetrated the roof, ALUMINUM ROOF COATING helps stop heat on a roof before it enters the roof system.
Time and temperature tests using ALUMINUM ROOF COATING produced the following results:
The surface coated with ALUMINUM ROOF COATING was cooler by 22° F. after one hour and by 26° F. after eight hours.
|
|
|
|
|
|
|
|
ALUMINUM ROOF COATING
Increases Roof's Life Expectancy
ALUMINUM ROOF COATING adds years of service to a roof. By reducing drying and cracking, it helps eliminate harmful leaks. On metal roofs, ALUMINUM ROOF COATING helps prevent the formation and spread of rust. A roof lasts longer with minimal maintenance.
ALUMINUM ROOF COATING
Beautifies
Pure aluminum flakes give ALUMINUM ROOF COATING its unequaled silver brilliance. Property that is attractive and well-maintained inspires confidence and lends a distinctive quality to the community. ALUMINUM ROOF COATING contributes significantly to a well-kept appearance.
ALUMINUM ROOF COATING
Is Easy To Apply
ALUMINUM ROOF COATING requires no thinning. Apply only on clean, dry surface. Rusted spots on metal roofs must be cleaned. New asphalt roofs should weather at least 90 days.
Stir until all aluminum pigment is suspended before applying with brush, roller or airless spray. Stir frequently while applying. ALUMINUM ROOF COATING is suitable for use on roll roofing, metal roofs, asphalt and gravel roofs. Spray application is not recommended when windy conditions exist.
Covering Capacity
The following coverage rates are minimums only. If asphaltic roofs are dried out, apply a coating of MIGHTYPLATE PRIMER, then allow 90 days before application of ALUMINUM ROOF COATING.
|
|
|
|
|
|
Metal
Flat
Corrugated
|
1 gal. to 350 sq. ft.
1 gal. to 215 sq. ft.
|
|
|
Mightyplate Roof
Coating
|
1 gal. to 300 sq. ft.
|
|
Mightyplate Modified
Bitumen Membrane
|
1 gal. to 300 sq. ft.
|
|
Composition and
Roll Roofing
|
1 gal. to 250 sq. ft.
|
|
|
|
 |
|
|
ALUMINUM ROOF COATING
(Asphalt Base)
Product Code #3035
Formulation Meets ASTM D-2824, Type 1
|
Color:
|
Soft Silver
|
|
|
Dry Mil Thickness:
|
2.9 mils at 250 square feet per gallon
|
|
Weatherability:
|
Good in Arid, Tropical and Cold Climates
|
|
Application:
|
Brush, Roller or Spray
|
|
Resistant To:
|
Rust, Corrosion, Water and Water Vapor, Saturated Solutions of Various Salts, and Sunlight.
|
PHYSICAL REQUIREMENTS:
|
Weight per Volume @ 60°F
|
8.17 lbs./gal.
|
|
|
Non-Volatiles, % by Wt.
|
46.00
|
|
Flash Point, PMCC, (ASTM D-93), Minimum
|
100°F
|
|
Consistency
|
Brush or spray
|
|
Asphalt Content, % by Wt.
|
24.5
|
|
Solvent Content, % by Wt., Maximum
|
57.2
|
|
Aluminum Paste per gallon
|
2.26 lbs.
|
|
Aluminum Pigment per gallon
|
1.63 lbs.
|
|
Viscosity @ 77°F, cps
|
40 - 70
|
|
Leafing, Percent Minimum
|
70
|
ALUMINUM PIGMENT . . . Meets Federal Specification TT-P-320, Type II, Class
C.NOTE: Read carefully and follow Application Instructions on label.
|
|
|
