ALUMINUM METAL SEAL
Insulates and Beautifies
Once repairs and preparations have been made, ALUMINUM METAL SEAL ROOF COATING provides superior roof protection plus the outstanding benefits of aluminum dispersed throughout. Thorough dispersion helps assure the aluminum will not weather off as with thin film aluminum metal paints. Aluminum stays on the roof reflecting hot and damaging rays of the sun, aiding in the insulation of the building and reducing thermal shock.
ALUMINUM METAL SEAL
Covers In One Coat
ALUMINUM METAL SEAL ROOF SYSTEM incorporates special rubber modifiers that create a chemical bond to the metal roof on which it is applied. No separate priming step is required. Waterproofing protection and aluminum reflectivity are achieved in one easy-to-apply coat, saving on labor costs
ALUMINUM METAL SEAL
Is Easy To Apply
Stir ALUMINUM METAL SEAL ROOF COATING to ensure aluminum is thoroughly suspended; then it is ready to use as it comes in the container. No thinning or heating required. ALUMINUM METAL SEAL RUBBERIZED CEMENT is of troweling consistency. ALUMINUM METAL SEAL ROOF COATING should be applied by brush.
ALUMINUM METAL SEAL
Is Durable
ALUMINUM METAL SEAL RUBBERIZED CEMENT is a solvent-based rubberized fibered polymer system. Its special formulation is designed to give extra strength and water resistance when cured. ALUMINUM METAL SEAL ROOF COATING will provide years of protection to any type of metal roof.
ALUMINUM METAL SEAL
Offers Rubberized Aluminum Protection
ALUMINUM METAL SEAL combines the flexibility of rubber and the reflective capabilities of aluminum in one convenient roof system. ALUMINUM METAL SEAL RUBBERIZED CEMENT effectively repairs and reinforces metal seams, bolts, fasteners and protrusions. ALUMINUM METAL SEAL ROOF COATING contains special rubber modifiers which provide extreme expansion and contraction properties to withstand roof movement.
Application Method
Surface should be cleaned and free from oil, grease, rust, loose paint and dirt. Remove rust with Texas Refinery Corp.'s RUST REMOVER or by wire brushing. Make certain all nails, screws, fasteners, etc. are in place and secure.
Reinforce seams, nail or screw holes and around protrusions with ALUMINUM METAL SEAL and POLY-MAT ROOFING MESH, using Texas Refinery Corp.'s "Sandwich System of Roof Repair."
Apply ALUMINUM METAL SEAL ROOF COATING by brush at a minimum rate of one gallon per 100 square feet.
|