SUPER ALUMINUM ROOF COATING

  • INSULATES
  • BEAUTIFIES
  • EASY TO APPLY
  • REFLECTS 80% OF ULTRAVIOLET RAYS
  • INCREASES ROOF'S LIFE EXPECTANCY

Aluminum Roof Coatings and Patching Products

Click on Product Name for Details?

SUPER ALUMINUM ROOF COATINGis a fibrated reflective top coating processed from high quality asphalt and fortified with aluminum flakes. It?s especially designed to preserve and protect a roof by reducing the surface temperature. It is ideal for realuminizing an asphalt or metal roof five to seven years after the original after the original aluminum coating application. Its formulation is compatible with most asphalt built-up roof systems and meets ASTM D-2824, Type lll Standards

SUPER ALUMINUM ROOF COATING

Insulates

SUPER ALUMINUM ROOF COATING dries to a shiny slighty textured silver finish and helps reflect up to 80% of the sun?s infrared and ultraviolet rays. It gives a greater mil thickness of protection than traditional aluminum coating, resulting in extra insulating ability. It helps stop the heat before it enters the roof system. Deflection of thes rays lowers the temperature on a roof and can reduce the temperature of the underneath side of the roof deck by as much as 26 0 F. Air conditioned buildings operate more efficiently, and non-air conditioned buildings feel more comfortable.

SUPER ALUMINUM ROOF COATING

Beautifies

Pure aluminum flakes gives SUPER ALUMINUM ROOF COATING its unequaled silver finish. Thicker than non-fibrated aluminum coatings, its softly textured appearance produces a handsome, long-lasting surface. Property that is attractive and well-maintained inspires confidence and lends a distinctive quality to the community. SUPER ALUMINUM ROOF COATING contributes significantly to a well-kept appearance.

SUPER ALUMINUM ROOf COATING

Easy to Apply

SUPER ALUMINUM ROOFCOATING is ready to use as it comes from the container. It requires no thinning. Apply only on clean, dry surface. Rusted spots on metal roofs must be cleaned prior to application. New asphalt roofs should weather a least 90 days.

Stir until all aluminum pigment is suspended before applying with brush, roller or airless spray. Stir occasionaly while applying. SUPER ALUMINUM ROOF COATING is suitable for use on roll roofing, metal roofs, asphalt and gravel roofs. Spray application is not recommended when windy conditions exist.

SUPER ALUMINUM ROOF COATING

Reflects up to 80% of Damaging UV Rays

The Sun is the most damaging enemy of any roof. It?s rays dry out the preservative oils and asphalts in ordinary roofing material. SUPER ALUMINUM ROOF COATING reflects u tp 80% of the sun?s ultraviolet rays. By deflecting these harmful rays, gleaming aluminum layers help protect roof asphalt from drying out and cracking. It significantly reduces thermal shock, the damaging effect of sudden swings in temperature which causes roof components to expand or contract and pull apart.

SUPER ALUMINUM ROOF COATING

Increases Roof?s Life Expectancy

With its greater mil thickness,pure aluminum flakes and top quality ingredients, SUPER ALUMINUM ROOF COATING adds years of service to a roof. It gets deep into hairline cracks to help prevent water seepage. Potential leaks are stopped before they begin. On metal roofs, SUPER ALUMINUM ROOF COATING helps prevent the formation and spread of rust. A roof lasts longer with minimal maintenance.

 

 

MINIMUM COVERAGES

 

 

Metal Roofs - Flat

1 gal. to 200 sq. ft

Metal Roofs - Corrugated

1 gal. to 150 sq. ft

Asphalt Coated Roofs

1 gal. to 150 sq. ft

Roll Roofing Paper

1 gal. to 150 sq. ft

Composition Shingles

1 gal. to 150 sq. ft

Gravel Roofs

2 gal. to 100 sq. ft

Masonry Surfaces

1 gal. to 100 sq. ft

Mightyplate Modified Bitumen Single-Ply Membrane

1 gal. to 150 sq. ft

SUPER ALUMINUM ROOF COATING

(Asphalt Base)
Product Code #3035
Formulation Meets ASTM D-2824, Type 1

 

Color:

Soft Silver

 

Dry Mil Thickness:

8 mils at 200 square feet per gallon

Weatherability:

Good in Arid, Tropical and Cold Climates

Application:

Brush, Roller or Spray

Resistant To:

Corrosion, Water and Water Vapor, Saturated Solutions of Various Salts, and Sunlight.

PHYSICAL REQUIREMENTS:

 

 

Weight per Volume @ 60°F

7.90 lbs./gal.

 

Non-Volatiles, % by Wt.

46.00

Flash Point, PMCC, (ASTM D-93), Minimum

100°F

Consistency

Brush or spray

Asphalt Content, % by Wt.

24.0

Solvent Content, % by Wt., Maximum

57.2

 

 

Aluminum Pigment % by wt.

25.0

Viscosity @ 77°F, cP typical

2500