Texas Refinery Coatings

PRO-CLEAN CONCENTRATE has been disconnected !!!

Go to Quadra klean

or

Multi-klene 

 

PRO-CLEAN

Is Phosphate Free

PRO-CLEAN CONCENTRATE is formulated to be used in cleaning applications where phosphates are not allowed or not wanted. Being completely free of any phosphates, PRO-CLEAN's physical properties and superior performance make it a great industrial cleaner.

PRO-CLEAN

Is Safe, Gentle And Biodegradable

PRO-CLEAN CONCENTRATE is a mild synthetic detergent with an almost-neutral pH of 8.9. It is not harsh or harmful to the skin, even during prolonged exposure. It is safe to use on any surface that's not harmed by water.

Its synthetic chemistry enables PRO-CLEAN to use a penetrating, wetting and emulsifying action without any harsh cleaning agents.

It is biodegradable and contains no NTA, no silicates, no carbonates and no phosphates.

PRO-CLEAN

Is Easy To Use

PRO-CLEAN is an easy to use liquid concentrate cleaner which is completely soluble in water in all proportions. No pre-mixing is necessary. It rinses clean, leaving no film or residue on surfaces.

Cleaning with PRO-CLEAN is handy. You can use it with a cloth, brush, spray gun, high pressure water system or in a steam cleaner. Soak tank cleaning is also an option with PRO-CLEAN.

PRO-CLEAN

Is Powerful

PRO-CLEAN CONCENTRATE requires only one to two ounces per gallon of water for light general purpose cleaning. It contains special foam stabilizers which form stable and long-lasting suds to lift soils and keep them in suspension until rinsing can be accomplished. Users enjoy optimum soil removal with longer working power.

PRO-CLEAN

Is Versatile

PRO-CLEAN CONCENTRATE is a versatile multi-purpose industrial cleaner. It can be used for a wide variety of cleaning jobs including, but not limited to, car washing, steam cleaning, heavy degreasing when mixed with a solvent and many other cleaning assignments. Simply put, it will work for most cleaning chores.

PRO-CLEAN

Is Economical

Since it only takes a couple of ounces of PRO-CLEANCONCENTRATE for each gallon of water to do general purpose cleaning, the actual cost per gallon after dilution is amazingly low.

PRO-CLEAN continues to be economical, even for the tougher cleaning jobs where three to six ounces per gallon of water is recommended. In special types of soils, such as those containing grease, PRO-CLEAN CONCENTRATE can be mixed with a solvent (such as kerosene) at the rate of four parts solvent to one part PRO-CLEAN.

 

USES

METHODS

ADVANTAGES

STEAM CLEANING

Mix 1 part of PRO-CLEAN to 15 or more parts of cold water.

Safe, no caustics. Effective wetting.

HEAVY DUTY EQUIPMENT WASHING

Pre-rinse equipment. Add 3 or 4 oz. PRO-CLEAN to each gallon of cold water. Apply PRO-CLEAN, use brush if needed, allow to soak 5 to 10 minutes. Rinse.

No harm to painted surfaces. Effective and economical.

REGULAR MAINTENANCE OF FLOORS, WALLS & PAINTED SURFACES

Dilute 1 to 2 oz. PRO-CLEAN to gallon of water.

Inexpensive and economical.

CLEANING & DEGREASING INDUSTRIAL EQUIPMENT (pumps, engines, etc.)

Dilute 1 part PRO-CLEAN with 4 parts solvent. (Note: Mix 1 gallon solvent* thoroughly with 1 gallon PRO-CLEAN. Now mix with remaining 3 gallons solvent). Spray or brush over surface. Let stand 5 to 10 minutes. Rinse. THIS SOLUTION IS FLAMMABLE.

No Caustics. Mild. Controls most lime and scale deposits. While cleaning in process, don't operate equipment.

COTTON PICKER WETTING AGENT

Mix 2 pints of PRO-CLEAN to each 45 to 50 gallons of water.

Keeps Spindle Pads wet clear through! Helps keep spindles clean.

PRO-CLEAN CONCENTRATE

Product Code

#1015

 

Specific Gravity

1.04

Pounds per Gallon

8.66

Color

Emerald Green

pH- Concentrate

8.85

pH- 10% Solution

8.7

Viscosity, cps Brookfield

500

Total Solids, Wt. %

24

P A

10.75

MA

52.70

Emulsion

Good

*Solvent such as kerosene, naphtha or Stoddard Solvent

HANDLING INFORMATION: For safe handling of the product, read the Material Safety Data Sheet (MSDS).