Texas Refinery Coatings

Texas  Refinery Corporation Fort Worth Texas

 Quality Products  since 1922

"ENERGY STAR PARTNER"

Nu-Floor Super Coat

Who is Texas Refinery Corporation?

The various plants of Texas  Refinery Corp. manufacture over 250  quality products that have  been researched and developed to meet specific needs of customers all over the world TRC Protective Coatings are second to none for roof repair, new roof construction, parking lot maintenance and other building maintenance projects.

 

Texas Refinery Truck 1922 90 years  the finest asphalt products
TRC  red white and blue famous  Texas Refinery  barrols

NU-FlOOR SUPER COAT

USER BENEATS:

  • PROTECTS AND BEAUTIIFIES CONCRETE FLOORS AND MANY OTHER SURFACES
  • SUPERIOR ADHESION . FLEXIBILITY AND RESISTANCE
  • TO CHIPPING AND PEELING
    NU-FLOOR SUPER COAT provides a protective tile-like finish for floors which seals out damaging chemicals and improves its appearance. It also serves as an excellent anti-graffiti coating for outside concrete or masonry surfaces
  • PROVIDES A DURABLE . EASILY
  • MAINTAINED SURFACE
  • EXCELLENT CHEMICAL RESISTANCE
  • SAFE AND EASY TO APPLY
  • ADVANCED TWO-COMPONENT MULTI-PURPOSE EPOXY SYSnM
  • NU-FLOOR SUPER COAT reflects the recent advances in water-based coatings technology. This two-part system gives outstanding performance without the hazards of solvent-based products. Its special formulation is USDA-approved and presents no danger of contamination during application and cure.

    NU-FLOOR SUPER COAT

    Protects and Beautifies Concrete Floors and Many Other Surfaces

    NU-FLOOR SUPER COAT provides a protective tile-like finish for floors which seals out damaging chemicals and improves its appearance. It also serves as an excellent anti-graffiti coating for outside concrete or masonry surfaces. Available in stock medium gray color with special order colors available in quantity purchases ... in medium gray, clear, tile red, tan, beige and safety yellow.

    NU-FlOOR SUPER COAT

    Superior Adhesion .. Flexibility And Resistance To Chipping And Peeling

    NU-FLOOR SUPER COAT has excellent resistance to abrasion, impact, chipping and peeling. Its flexibility assures an absence of cracking.

    NU-FLOOR SUPER COAT

    Provides A Durable .. Easily Maintained Surface

    NU-FLOOR SUPER COAT provides a non-absorbent, sanitary surface that allows for easy clean-up and maintenance. One coat will last for years.

    NU-FLOOR SUPER COAT Excellent Chemical Resistance

    NU-FLOOR SUPER COAT has a high resistance to chemicals, acids, oils, solvents, detergents and hot water.

    NU-FlOOR SUPER COAT Safe And Easy To Apply

    Advanced water-based formulation means no harmful solvent fumes and low odor during application and cure.

    NU-FLOOR SUPER COAT Advanced Two-Component MultiPurpose Epoxy System

    This versatile coating is safe, easy to apply and emits no strong or harsh odors. It can be applied with a brush, roller, or spray to solid, properly cleaned surfaces that have been primed with NU-FLOOR PRIMER. Proper mixing of the two components before application assures years of trouble-free performance. It's recommended for wood, concrete, masonry and brick floors, walls and ceilings.

     

    NU-FLOOR SUPER COAT

              • Product Code #3253
              • RECOMMENDED FOR

      WOOD, CONCRETE, MASONRY, BRICK FLOORS, WALLS, CEILINGS

     

          • NU-FLOOR SUPER COAT
              • Product Code #3253
              • RECOMMENDED FOR
    • WOOD, CONCRETE, MASONRY, BRICK FLOORS, WALLS, CEILINGS
    • TYPICAL PROPERTIES
  • Type  Epoxy polyamine emulsion
  •  Solids by Weight  53.0% (+,-2%)

     Coverage  229 - 320 sq. ft. per gallon

     Pot Life  1 Y, hours at 70?F.

     Film Thickness  5 - 7 mils wet

     Application Temperature 40?F - 90? F., relative humidity below

        • 70?F.
  • Cure Schedule Tack-free: 4 - 6 hours at 77?F.
        • Recoat: 5 - 7 hours at 77?F.
        • Light Traffic: 8 - 16 hours at 77?F. Full cure: 2 - 7 days at 77?F.
  • Color Stock - medium gray
  • NOTE: Color may vary slightly from batch to batch due to variation in feed stock materials.

    SPECIFYNG INFORMATION:

    SOLIDS BY WEIGHT: 53.0% (+,-2%)

    VOLATILE ORGANIC CONTENT: (v.o.c.) Part A = 1.20 pounds per gallon; Part B = 0.0. pounds per gallon. The mixed v.o.c. - 1.01 pounds per gallon.

    SOLIDS BY VOLUME: 41 % (+,-2%)

    RECOMMENDED FILM THICKNESS: 2 - 3 mils dry (5 - 7 mils wet) FINISH: gloss (60 degree = 65, 20 degree = 43)

    MIX RATIOS: Part A - 8.55 pounds (.80 gal. approx.)

    • Part B -1.75 pounds (.2 gal. approx.)
  • PACKAGING INFORMATION: This product is available in one and two gallon kits (1 gallon kits = 10.3 pounds net; 2 gallon kits = 20.6 pounds net).
  • THEORETICAl COVERAGE: 229 - 320 sq. ft./gallon ie. (2 gallon kit yields 458 to ,640 sq. ft.)

    SHELF LIFE: 1 year

    PHYSICAl PROPERTIES:

    ABRASION RESISTANCE: Using a Tabor Abrasor with a CS17 calibrase wheel, the mg loss = 54 for 500 cycles.

    IMPACT RESISTANCE: Gardiner Variable impactor, 50 in. - lb. direct (passed)

    FLEXIBILTY: No cracks on a 1/e" mandrel

    ADHESION: 425 p.s.i. using an elcometer - no delamination (concrete failure)

    POT LIFE: This testing was performed with a 100 gram mass at 52% relative humidity

     70 degrees F  (pot life)  90 minutes

     80 degrees F  (pot life)  76 minutes

     90 degrees F  (pot life)  64 minutes

     100 degrees F (pot life) 51 minutes

     110 degrees F (pot life) 36 minutes

     120 degrees F (pot life) 25 minutes

    Fast-drying and easy to apply

    • Improves the appearance and performance of any substrate
  • Provides durable, cleanable surfaces Offers excellent anti-graffiti protection Meets V.O.C. Requirements for New York, New Jersey and California
  • CURE SCHEDULE:
  •  tack free 4 - 6 hours @ 77"F.

     recoat  5 - 7 hours @ 77?F.

     full cure 2 - 7 days @ 77?F.

    Applications should be performed with temperatures between 55?F. and 90?F. with the relative humidity below 75% for the best results.

      • CHEMICAL RESISTANCE:
  • CHEMICAL NAME xylene
  • toluene

    1, 1, 1 trichloroethane mek

    ethylene glycol

    monomethyl ether ethyl alcohol

    methyl alcohol

    water (distilled)

    10% sodium hydroxide 50% sodium hydroxide 10% sulfuric acid

    50% sulfuric acid

    10% hydrochloric acid 20% nitric acid

    10% acetic acid

    WEIGHT GAIN 7.20

    • 6.30
    • 3.10
  • o 16.40 16.50 7.30
  • o 0.60 0.30 0.10 3.50 8.90 3.80 7.00 12.00

    • IMMERSION TIME 3 weeks
    • 3 weeks
    • 3 weeks
    • 3 weeks
    • 3 weeks
    • 3 weeks
    • 3 weeks
    • 3 weeks
    • 3 weeks
    • 3 weeks
    • 3 weeks
    • 3 weeks
    • 3 weeks
    • 3 weeks
    • 3 weeks
    • 3 weeks
  • Unless preceded by a minus sign, the figures represent a weight gain. A weight loss indicates leaching and is signified by a minus sign. Absorption and leaching occur to some degree simultaneously in all testing. Testing was carried out on discs 1.75" in diameter and 0.2" thick.
  • PRIMER: NU-FLOOR PRIMER

    Physical properties are typical values and not specifications.

    Please see usage instructions for limitations of our liability and warranty.

    Handling Information: For safe handling of the product, read the Material Safety Data Sheet (MSDS).