Texas Refinery Coatings

NU-FLOOR FLEX-JOINT

NU-FLOOR FLEX-JOINT is a two-component modified polymer containing both urethane and epoxy resins. It provides a resilient filler for expansion joints. It possesses high tensile strength and impressive flexibility. It provides a tenacious, long-lasting, trouble-free repair.USER BENEFITS:

  • EXCELLENT FLEX - WON'T CRACK
  • GOOD ABRASION RESISTANCE AND TENSILE STRENGTH
  • 100% SOLIDS - NO FUMES
  • NON-FLAMMABLE AND SAFE
  • EASY TO USE

NU-FLOOR FLEX-JOINT is a two-component modified polymer containing both urethane and epoxy resins. It provides a resilient filler for expansion joints. It possesses high tensile strength and impressive flexibility. It provides a tenacious, long-lasting, trouble-free repair.

 

Excellent Flex - Won't Crack NU-FLOOR FLEX-JOINT has a tremendous expansion and contraction factor, up to 50% elongation. It remains flexible from -40?F. to 200?F.NU-FLOOR FLEX-JOINT

Excellent Flex - Won't Crack

NU-FLOOR FLEX-JOINT has a tremendous expansion and contraction factor, up to 50% elongation. It remains flexible from -40?F. to 200?F.

NU-FLOOR FLEX-JOINT

Good Abrasion Resistance And Tensile Strength

NU-FLOOR FLEX-JOINT is strong and durable. Typical tensile strength tests measure 3,289 pounds per inch. Abrasion resistance is consistently high.

NU-FLOOR FLEX-JOINT

100% Solids - No Fumes

NU-FLOOR FLEX-JOINT contains 100% urethane and epoxy solids. No toxic fumes are emitted during mixing and application. Efficient joint sealing and protection is assured.

 

NU-FLOOR FLEX-JOINT

Non-Flammable And Safe

NU-FLOOR FLEX-JOINT has no volatile organic content. It is non-flammable and carries no special hazards during mixing, application or cure.

NU-FLOOR FLEX-JOINT

Easy To Use

Simply mix the two components and then pour slowly into the joint after proper preparation. Allow 24 hours curing time before opening to traffic. No special application tools are required.

NU-FLOOR FLEX-JOINT

Product Code # 3290

RECOMMENDED FOR EXPANSION JOINTS OF HIGHWAYS, BRIDGES, AIRPORTS (EXCLUDING RUNWAYS), GARAGES, INDUSTRIAL FLOORS AND MARINE DECKS
TYPICAL PROPERTIES

Type

Epoxy urethane

 

Solids by Weight

100%

Color

gray

Working Life

40 - 60 minutes

Dry Time

6 - 8 hours

Mix Ratio

1 to 1 by volume

Application Temperature

Above 50?F.

Traffic Servicable

24 hours

Coverage

25 - 30 linear ft. per gallon in ?" x 1" crack

SPECIFYING INFORMATION:

SOLIDS BY WEIGHT: 100%

VOLATILE ORGANIC CONTENT: (V.O.C.) 0.0 pounds per gallon

THEORETICAL COVERAGE PER MIXED GALLON: one gallon @ ?" x 1.0" yields 30 - 35 linear feet

COLOR: Part A is white, Part B is black, and the mixed finished product is gray.

RECOMMENDED APPLICATION THICKNESS: This product should be applied between ?" to 1?" depths.

MIX RATIO: 1 to 1 by volume

PRODUCT TYPE: epoxy/urethane (hybrid)

SHELF LIFE: 6 months

PACKAGING INFORMATION: 2 Gallon Kit is comprised of 8.9 pounds Part A and 11.3 pounds Part B. Each 2 Gallon Kit yields 20.2 pounds net.

POT LIFE: 45 minutes @ 70?F. and 150 gram mass (to double viscosity)

APPLICATION TEMPERATURE: above 50?F.

CURE SCHEDULE:

DRY TIME

6 - 8 hours (tack free)

 

RECOAT

12 hours @ 75?F.

LIGHT TRAFFIC

24 hours

FULL CURE

3 - 5 days
Handling Information: For safe handling of the product, read the Material Safety Data Sheet (MSDS).