USES
|
METHODS
|
ADVANTAGES
|
HAND WIPING MACHINER Y IN MACHINE SHOPS?
|
Dilute 2/3 oz. MULTI-KLEAN to a gallon of hot or cold water. Hand wipe or spray on. Wipe off.
|
Effective cleaning solution for just a few cents per gallon. Solution won't sour if left for a long period of time.
|
HAND CLEANER
|
Mix solution of 2 parts MULTI-KLEAN to 3 parts CLEAR WATER. Ideal for liquid wall dispensers in rest rooms.
|
Makes a fine high grade hand cleaner. Penetrates most stubborn soils. Leaves most hands clean and soft. Does not dry out most skin.
|
NEWSPAPE R BUILDING MAINTENA NCE
|
Mix 1 oz. of MULTI-KLEAN to a gallon of clear water.
|
Ideal cleaning solution that readily attacks "ink mist." Effective wall and floor cleaner. Gives fast, economical cleaning.
|
STEAM CLEANING
|
Mix 1 part of MULTI-KLEAN to 35 or more parts of cold water. Concentration depends on stubbornness of soiled area to be cleaned. Add more MULTI-KLEAN as needed.
|
No caustics, mild scent, safe on most types of metals. Safe for most workers. Speedy, effective, wetting and penetrating action.
|
HEAVY DUTY EQUIPMEN T WASHING
|
Pre-rinse equipment to be cleaned. Add 1 or 2 ounces of MULTI-KLEAN to each gallon of water, depending upon soiled condition of equipment. Use cold or warm water. Apply mixture of MULTI-KLEAN and water to equipment. Agitate the extremely soiled areas with a brush or swab. Allow chemical to do its work by soaking action of five or ten minutes duration. Now rinse equipment clean.
|
No harm to painted surfaces. Dirt rinses away easily. An economical and effective cleaner. Safe to most hands.
|
REGULAR MAINTENA NCE OF FLOORS, WALLS AND PAINTED SURFACES
|
Dilute 2/3 oz. MULTI-KLEAN to a gallon of clear, clean water: (hot, warm or cold).
|
An effective inexpensive cleaning for just a few cents per gallon. Easy to use!
|
CONCRETE FLOORS WITH HEAVY DEPOSITS OF OIL AND GREASE (Driveways, Loading Docks, Parking Areas and Runways)
|
Mix 1 part MULTI-KLEAN to 4 parts solvent, such as kerosene. (NOTE: Mix one gallon kerosene and one gallon MULTI-KLEAN thoroughly. Now mix with remaining three gallons kerosene.) This emulsion needs to be agitated occasionally. Apply to soiled surface. Let soak. Rinse with high pressure hose. One gallon of solution covers approximately 150 square foot area. THIS SOLUTION IS FLAMMABLE.
|
Combination of strong wetting-penetrating and emulsifying agents. Extreme rinsibility and water hardness control. (When drain facilities are not available, excess solution may be pushed out with rubber bladed squeegee. Area may be mopped with clear rinse water.)
|
CAR WASHING
|
Pre-rinse by hosing down with plain water. Dilute 2 ounces of MULTI-KLEAN to 3 gallons of clear water. Use brush or swab. Hose rinse with clear water.
|
No HARM to expensive car finish if used according to directions. Essentially free rinsing. Economical effective cleaner. Safe to most hands.
|
CLEANING AND DEGREASIN G INDUSTRIA L EQUIPMEN T (Pumps, Engines, Compressors)
|
Dilute 1 part MULTI-KLEAN with 4 parts solvent such as kerosene. (NOTE: Mix 1 gallon kerosene thoroughly with 1 gallon MULTI-KLEAN. Now mix with the remaining three gallons kerosene.) Spray or brush solution over entire surface to be cleaned. Let stand 5 to 15 minutes. Rinse the surface with water hose. Use air hose if available, to blow off excess water. THIS SOLUTION IS FLAMMABLE.
|
No caustics, mild scent, safe on most metals. Speedy, effective wetting and penetration action. Controls most lime and scale deposits. While cleaning is in process, don't operate equipment. Works extremely well on warm motor surfaces. Equipment put back in use immediately after cleaning process.
|
LIQUID LAUNDRY DETERGEN T FOR FABRICS SOILED WITH OIL AND GREASE
|
1 or 2 ounces per gallon in the washing equipment. Soak heavily soiled fabrics in straight MULTI-KLEAN - then wash as usual.
|
Added emulsifiers penetrate greases and oils and make them mix with water. Safe for all normally washable fabrics.
|
HAND DISHWASHI NG
|
3/4 oz. per gallon of tap water.
|
Emulsifiers and wetting agents soak soils and lift them from pots and pans.
|
COTTON PICKER WETTING AGENT
|
Mix 1 pint of MULTI-KLEAN to each 45 to 50 gallons of water.
|
Helps keep "Spindle Moistener" pads wet clear through! This helps keep spindles clean, thereby reducing clogging of spindles and assuring improved, clean picking of cotton.
|