Texas Refinery Coatings

TEXOTROPIC
FIBERED ALUMINUM ROOF COATING

TEXOTROPIC FIBERED ALUMINUM ROOF COATING is a thick gel coating that provides greater protection than ordinary thin film coatings. It contains pure aluminum flakes and is fortified with a synthetic fiber for added strengthUSER BENEFITS:

  • EXTENDS ROOF LIFE
  • INSULATES
  • PROTECTS
  • EASY TO APPLY
  • BEAUTIFIES
  • FIBER REINFORCED

 

TEXOTROPIC FIBERED ALUMINUM ROOF COATING is a thick gel coating that provides greater protection than ordinary thin film coatings. It contains pure aluminum flakes and is fortified with a synthetic fiber for added strength

 

 

 

Aluminum Roof Coatings and Patching Products

Click on Product Name for Details?

 

 

TEXOTROPIC

Extends Roof Life

TEXOTROPIC FIBERED ALUMINUM ROOF COATING gets deep into hairline cracks to help prevent water seepage. Potential leaks are stopped before they begin. TEXOTROPIC helps preserve the roofing membrane to add years of service life to a roof.

TEXOTROPIC

Insulates

TEXOTROPIC FIBERED ALUMINUM ROOF COATING cures to a gleaming silver finish which reflects up to 80% of the sun's infrared and ultraviolet rays. Deflection of these rays lowers the temperature of a built-up and metal roofing system and can reduce the temperature of the underneath side of the roof deck by as much as 26?F. Air conditioned buildings operate more efficiently; non-air conditioned buildings feel more comfortable.

TEXOTROPIC

Protects

By deflecting heat before it has a chance to enter a roof system TEXOTROPIC FIBERED ALUMINUM ROOF COATING helps protect the roof membrane against drying, cracking and splitting caused by the elements. Unlike thin film roof coatings, TEXOTROPIC is a viscous gel which cures to a greater mil thickness to provide extra protection. Helps prevent the formation and spread of rust and other organic growths on metal roofing.

TEXOTROPIC

Is Easy To Apply

TEXOTROPIC FIBERED ALUMINUM ROOF COATING is ready to use as it comes from the container. No heating or thinning required. Stir until aluminum pigment is thoroughly suspended and stir frequently during application. TEXOTROPIC may be applied by brush, roller, squeegee or spray. Spray application is not recommended when windy conditions exist. It is suitable for use on roll roofing, metal roofs, asphalt and gravel roofs. TEXOTROPIC can be used inside lumber kilns to seal the surface and maintain the humidity inside the kiln. Also, the reflectance of the aluminum will help keep the heat inside the kiln, thus reducing the amount of heat required to maintain the proper temperature.

TEXOTROPIC

Beautifies

TEXOTROPIC FIBERED ALUMINUM ROOF COATING looks as great as it performs. Pure aluminum flakes give TEXOTROPIC a gleaming silver brilliance. Property that is attractive and well maintained inspires confidence and lends a distinctive quality to the community. TEXOTROPIC contributes significantly to a well-kept appearance.

TEXOTROPIC

Is Fiber Reinforced

TEXOTROPIC FIBERED ALUMINUM ROOF COATINGs combine special asphalts, pure aluminum flakes and reinforcing fibers to provide superior roof protection. Unlike thin paint film coatings, TEXOTROPIC cures to a greater mil thickness for extra protection.

TEXOTROPIC FIBERED ALUMINUM ROOF COATING PAYS FOR ITSELF WITH:

1. GREATER INSULATING ABILITY ? helps save on utility expenses.

2. LESS ROOF MAINTENANCE COST ? greater protection.

MINIMUM COVERAGES

The following coverage rates are minimums only. If asphaltic roofs are dried out, apply a coating of MIGHTYPLATE PRIMER before the application of TEXOTROPIC.

 

Metal Roofs

Flat
Corrugated

1 gal. to 100 sq. ft.
1? gal. to 100 sq. ft.

Asphalt Coated Roofs

1? gal. to 100 sq. ft.

Roll Roofing Paper

1? gal. to 100 sq. ft.

Masonry Surfaces

1? to 2 gal. to 100 sq. ft.

MIGHTYPLATE

Modified Bitumen Membrane

1? gal. to 100 sq. ft.

Lumber Dry Kilns

1? to 2 gal. to 100 sq. ft.

TEXOTROPIC
FIBERED ALUMINUM
ROOF COATING

Product Code #3040

(Formulation meets ASTM D-2824, Type III (Non-Asbestos)

 

COLOR:

Soft Silver

 

DRY MIL THICKNESS:

14 mils at 1? gal. per 100 sq. ft.

APPLICATION METHOD:

Brush, Roller or Spray

RESISTANT TO:

Corrosion, Water and Water Vapor, Saturated solutions of various Salts, Sunlight.

WEATHERABILITY:

Good in Arid, Tropical and Cold Climates
PHYSICAL REQUIREMENTS:

 

Specific Gravity at 60?F

0.98

 

Weight per Volume at 60?F.

8.16 lbs./gal.

Non-Volatile Matter, % by wt.

55.0

Viscosity, Brookfield @ 77?F, CPS

8000 - 15000

Flash Point, PMCC, min. (ASTM D-93)

100 minimum

Consistency

Heavy Brush or Spray

Asphalt Content, % by wt.

32.0

Solvent Content, % by wt.

36.0

Water Content, % by wt.

Less than 0.4%

*Aluminum Pigment, % by wt.

28.0

Dessicant

1.0
*ALUMINUM PIGMENT - - Meets Federal Specification TT-P-320, Type III, Class C.

NOTE: Read Carefully and Follow Application Instructions on Label.

 

NOTE: Obvious roof defects should be properly repaired before TEXOTROPIC APPLICATION. Open seams, broken flashings, blisters and breaks in the roof should be permanently repaired with MIGHTYPLATE PLASTIC CEMENT and GLAS-WEB. Proper PATCHING ensures you the greatest possible benefit from TEXOTROPIC FIBERED ALUMINUM ROOF COATING. This extra care in the beginning pays off handsomely for years to come.
Handling Information: For safe handling of the product, read the Material Safety Data Sheet (MSDS).