Texas Refinery Coatings

ALUMINUM ROOF CEMENT

USER BENEFITS: ALUMINUM  ROOF CEMENT is the single most important element in repairing and reinforcing weak areas on a metal roof.

  • REPAIRS AND REINFORCES
  • EASY-TO-APPLY
  • GIVES EXTRA STRENGTH
  • ALUMINUM PIGMENT THROUGHOUT
  • VERSATILE PROTECTION
  • PLIABLE IN ALL TYPES OF WEATHER

ALUMINUM ROOF CEMENT is the single most important element in repairing and reinforcing weak areas on a metal roof. By applying to seams and fastener heads, leaking or potentially leaking areas can be made watertight for years to come. ALUMINUM  ROOF CEMENT is specified in two of Texas Refinery Corp.'s recommended systems for metal roofs, the ALUMINUM  ROOF SYSTEM and the ALUMINUM SHIELD SYSTEM II.

Aluminum Roof Coatings and Patching Products

 

ALUMINUM
ROOF CEMENT
Repairs and Reinforces

ALUMINUM ROOF CEMENT is the single most important step in repairing a roof and reinforcing problem areas. The roof is ready for repairs after a thorough cleaning. QUADRA-KLEAN mixed with water (1:4) works well. For rusted areas use Texas Refinery Corp.'s RUST REMOVER. Rinse thoroughly with water under pressure, if possible. Then coat the roof with QUICK-DRY ANTI-OXIDENE Coating, if required by the specified system. QUICK-DRY ANTI-OXIDENE will stop the two most powerful enemies of a metal roof ... rust and corrosion. In instances where rust is severe and the integrity of the metal is questionable, those portions of the metal roof should be replaced.

Once cleaned and readied, use ALUMINUM METAL SEAL ROOF CEMENT to quickly repair seams, protrusions, fastener heads, bolts and screws. If utilizing the ALUMINUM METAL ROOF SYSTEM, reinforce seams, nail and screw holes and around protrusions with ALUMINUM ROOF CEMENT and POLY MAT ROOFING MESH, using Texas Refinery Corp.'s "Sandwich System of Roof Repair."

With the ALUMINUM SHIELD SYSTEM II, ALUMINUM QUICK PATCH (available in 3" wide rolls and 3" x 3" squares) is used to seal separated seams and protrusions. ALUMINUM METAL SEAL ROOF CEMENT is applied to fastener heads and where needed to seal leaking or potential leaking areas.

ALUMINUM METAL SEAL
ROOF CEMENT
Easy To Apply

ALUMINUM METAL SEAL ROOF CEMENT is a solvent-based rubberized fibered polymer system. Easily applied with a trowel, or even a fibered applicator such as a brush or mop. Available in 5 gal. pails and in cases of 4 one gallon pails It is designed to give extra strength and water resistance when cured.

ALUMINUM
ROOF CEMENT
Gives Extra Strength

ALUMINUM ROOF CEMENT can be used to effectively repair and reinforce metal seams, bolts, fasteners and protrusions. Used in conjunction with POLY-MAT Roofing Material in the standard ALUMINUM METAL SEAL ROOF SYSTEM or with ALUMINUM QUICK-PATCH in the ALUMINUM SHIELD SYSTEM II, ALUMINUM METAL ROOF CEMENT helps eliminate thermal shock which causes damage by expansion and contraction. In effect, it helps waterproof and stabilize any separated vertical or horizontal seams and projections through the roof.

ALUMINUM
ROOF CEMENT
Aluminum Pigment Throughout

ALUMINUM ROOF CEMENT contains an aluminum pigment which gives excellent reflectivity of the sun's rays. The aluminum pigment is dispersed throughout the product for uniform product consistency and beauty.

ALUMINUM
ROOF CEMENT
Helps Prolong Service Life of the Roof

Providing the sections of the roof have been properly treated, repaired and/or replaced as recommended, ALUMINUM METAL SEAL ROOF CEMENT will help extend greatly the life span of the metal roof.

ALUMINUM METAL SEAL
ROOF CEMENT
Versatile Protection

Repair, waterproofing protection and aluminum reflectivity are achieved in an easy-to-apply, labor saving product. ALUMINUM SHIELD SYSTEM II is the one to go with. The ALUMINUM SHIELD SYSTEM II, when applied according to Texas Refinery's instructions, guarantees waterproof results. Length of guarantee dependent on the type of final coating:

Two years using ALUMINUM ROOF COATING

Four years when TEXOTROPIC FIBERED ALUMINUM ROOF
COATING is applied in the final coat. See limited warranty for
full details.

ALUMINUM ROOF CEMENT Product Code #3043

Percent Solids by Weight

72%

 

Percent Solids by Volume

68%

Weight per Gallon: Pounds

9.68

Flash Point

105 Degrees F. (Seta C.C.)

pH

N/A

Viscosity @ 77 degrees F.

624,000 cps

Long Term Service Temperature

.-60 degrees F. to +160 degrees F.

Water Resistance: Intermittent Exposure

Excellent

Water Resistance: Ponded

Fair

Solvent Resistance

Poor

U.V. Resistance

Excellent

 

 

 

 

Handling Information: For safe handling of the product, read the Material Safety Data Sheet (MSDS)